Identifikasi Pengelolaan Sampah Plastik Dengan Metode Pirolisis di TPA Kedungdowo, Kabupaten Nganjuk
DOI:
https://doi.org/10.30736/jev.v9i1.802Keywords:
Bahan bakar minyak, Limbah plastik, PirolisisAbstract
Abstrak
Plastik telah menjadi elemen krusial dalam kehidupan modern, tetapi juga berdampak buruk pada lingkungan. Limbah plastik tetap menjadi tantangan utama dalam kehidupan modern meskipun dapat didaur ulang. Tujuan dari penelitian ini adalah untuk mengidentifikasi proses dalam pengolahan limbah plastik untuk diubah menjadi bahan bakar minyak menggunakan teknologi pirolisis di TPA Kedungdowo, Kabupaten Nganjuk. Hasil penelitian menunjukkan bahwa proses atau tahapan pengolahan limbah plastik untuk menghasilkan bahan bakar minyak yang meliputi tahapan pemilahan, pembersihan, pengeringan, pencacahan dan proses pirolisis. Bahan baku yang dapat digunakan dalam pengelolaan ini merupakan jenis plastik sampah dari jenis Low-density Polyethlene (LDPE) dan jenis plastik Polyetylene (PP). Secara keseluruhan, pemanfaatan dalam pengelolaan limbah plastik yang akan menjadi bahan bakar minyak dengan menggunakan metode pirolisis di TPA kedungdowo merupakan upaya untuk mengurangi dampak lingkungan dari limbah plastik sekaligus menghasilkan sumber energi alternatif yang digunakan untuk masyarakat setempat.
Downloads
References
Mega Muriara Sari, Iva Yenis Septiariva Rofiah, I Wayan Koko Suryawan, and Sapta Suhardono, “Potensi Ekonomi Pirolisis Sampah Plastik untuk Pengelolaan Berkelanjutan: Studi Kasus Plastik Pembungkus Paket ,” Jurnal Ilmu Lingkungan, vol. 22, no. 4, pp. 941–950, 2024.
Moh. Abiyyu Haidar, Nor Faizeh, and Bambang Wahyudi, “Pengolahan Sampah Plastik Menjadi Bahan Bakar Minyak dengan Menggunakan Proses Pirolisis,” Jurnal Penelitian Dan Pengabdian Masyarakat, vol. 2, no. 10, pp. 2238–2243, 2023.
S. I. Purnamasari and P. S. A. Sitogasa, “Analisis Sistem Pengelolaan Sampah di TPA Tegalasri Kabupaten Blitar,” pp. 25–30, May 2024, [Online]. Available: http://envirotek.upnjatim.ac.id/
I. Pratiwi, I. Yunanto, and P. Negeri Sriwijaya, “PENYULUHAN PEMANFAATAN LIMBAH PLASTIK SEBAGAI BAHAN BAKAR ALTERNATIF DI PESANTREN AR RAHMAN TEGAL BINANGUN SUMATERA SELATAN.”
S. B. A. N. L. Z. Badrul Wajdi, “Pengolahan Sampah Plastik Menjadi Bahan Bakar Minyak (BBM) Dengan Metode Pirolisis Sebagai Energi Alternatif,” Kappa Journal, vol. 4, no. 1, pp. 100–112, 2020.
E. Komara Mindarta, D. Zakariya Lubis, D. Irawan, T. Yuhana, and Y. Rian Pratama, “PENERAPAN TEKNOLOGI PORTABLE PLASTIC PYROLYSIS REACTOR MACHINE (P3RM) UNTUK MENINGKATKAN EFISIENSI PROSES DAUR ULANG SAMPAH PLASTIK MENJADI BBM DI DESA JATIREJOYOSO, KEPANJEN, KABUPATEN MALANG,” 2023. [Online]. Available: https://dmi-journals.org/jai/428
Zurohaina et al., “Analisa Bahan Bakar Minyak Hasil Pirolisis Sampah Plastik Jenis PP Dan PET Terhadap Kinerja Generator SET Pada PLTSA Plastik Kapasitas 1000 Watt,” Jurnal Kinetika, vol. 10, no. 01, pp. 24–30, 2019.
Nur Farida et al., “Pemanfaatan Sampah Plastik Menjadi Bahan Bakar Minyak Dengan Proses Pirolisasi BSB Di Desa Kasilib Wanadadi Banjarnegara,” ASPIRASI : Publikasi Hasil Pengabdian dan Kegiatan Masyarakat, vol. 2, no. 2, pp. 22–30, Feb. 2024, doi: 10.61132/aspirasi.v2i2.418.
S. Sapril, A. T. Kusuma, A. Aswan, A. Zikri, and I. Hajar, “PIROLISIS PLASTIK MENJADI BAHAN BAKAR CAIR MENGGUNAKAN KATALIS ZEOLIT TERAKTIVASI,” Publikasi Penelitian Terapan dan Kebijakan, vol. 5, no. 1, pp. 9–18, Jun. 2022, doi: 10.46774/pptk.v5i1.364.
Rr Bella Alda Restanti and Mohamad Mirwan, “Pengolahan Sampah Plastik Menjadi Bahan Bakar Minyak Alternatif dengan Metode Pirolisis,” Jurnal Serambi Engineering, vol. VIII, no. 4, pp. 7224–7231, 2023.
Dominika Sujani, Kristina Ilis, Ame, and Helena Anggraeni (Reni) Tjondro Sugianto, “Manajemen Strategi Pengolahan Sampah Menjadi Gas Metana di Tempat Pembuangan Akhir Desa Paras, Malang,” Jurnal Pengabdian Bukit Pengharapan, vol. 3, no. 2, pp. 53–63, 2023.
A. Yani, “Pengolahan Limbah Plastik Menjadi Bahan Bakar Minyak untuk Mengatasi Sampah Plastik di Kota Bontang,” JST (Jurnal Sains Terapan), vol. 7, no. 2, pp. 36–41, Dec. 2021, doi: 10.32487/jst.v7i2.1165.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Lailatul Fitriyah, Pradisty S. Ardisty Sitogasa
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Please find the rights and licenses in Jurnal EnviScience (Environment Science). By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
2. Author(s)' Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User/Public Rights
Jurnal EnviScience's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, Jurnal EnviScience permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and Jurnal EnviScience on distributing works in the journal and other media of publications. Unless otherwise stated, the authors are public entities as soon as their articles got published.
4. Rights of Authors
Authors retain all their rights to the published works, such as (but not limited to) the following rights;
Copyright and other proprietary rights relating to the article, such as patent rights,
The right to use the substance of the article in own future works, including lectures and books,
The right to reproduce the article for its own purposes,
The right to self-archive the article (please read out deposit policy),
The right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal (Jurnal EnviScience).
5. Co-Authorship
If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. Jurnal EnviScience will not be held liable for anything that may arise due to the author(s) internal dispute. Jurnal EnviScience will only communicate with the corresponding author.
6. Royalties
Being an open accessed journal and disseminating articles for free under the Creative Commons license term mentioned, author(s) aware that Jurnal EnviScience entitles the author(s) to no royalties or other fees.
7. Miscellaneous
Jurnal EnviScience will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed. Jurnal EnviScience's editors may modify the article to a style of punctuation, spelling, capitalization, referencing and usage that deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers as mentioned in point 3.
