Analisis Risiko K3 dengan Metode Hazard and Operability Study (HAZOP) pada Conveyor Body Preparation pada Industri Keramik Mojokerto
DOI:
https://doi.org/10.30736/7ijev.v7iss2.554Abstract
Perusahaan Industri Keramik di Mojokerto merupakan industri manufaktur yang berkewajiban untuk melaksanakan Kesehatan dan Keselamatan Kerja (K3). Upaya penerapan dilakukan untuk mencegah atau bahkan menghilangkan risiko kecelakan dan penyakit akibat kerja. Penelitian ini memiliki tujuan untuk mengetahui dan menganalisa bahaya apa saja yang dapat terjadi di area conveyor body preparation. Penelitian ini dilakukan dengan cara observasi lapangan dan wawancara para pekerja, kemudian data diolah menggunakan metode HAZOP. Hasil menunjukkan sebanyak 18% risiko ekstrem, 18% risiko sedang, dan 64% risiko tinggi. Tingkat risiko ekrstrim dengan nilai 15 berada pada aktivitas cleaning mesin feeder box, pengoperasian conveyor, dan pengoperasian panel. Pengendalian yang dapat dilakukan adalah dengan cara penegasan penggunaan Alat Pelindung diri yang kemudian diikuti dengan pengendalian teknik ataupun pengendalian administrasi bagi para pekerja.
Kata Kunci: Conveyor Body Preparation, HAZOP, K3, Pengendalian Risiko
Downloads
References
A. Prahutama, “Estimasi kandungan DO (Dissolved Oxygen) di Kali Surabaya dengan Metode Kriging,†J. Jur. Stat., vol. 1, no. 2, pp. 1–6, 2013.
L. Praditya and N. Hendrasarie, “Evaluasi Penerapan Fit to Work Guna Peningkatan Kesehatan dan Keselamatan Kerja di Terminal Kalimas Surabaya,†vol. VIII, no. 2, pp. 5629–5633, 2023.
Kemenaker RI, Profil Keselamatan dan Kesehatan Kerja Nasional Indonesia Tahun 2022. 2022.
KEMENKER RI, “Peraturan Menteri Tenaga Kerja Republik Indonesia,†Upah Minim., no. 106, p. 12, 2017, [Online]. Available: https://ppid.sumbarprov.go.id/home/details/5257-peraturan-menteri-tenaga-kerja-r-i-nomor-per-04-men-1993-tentang-jaminan-kecelakaan-kerja.html
D. R. Sari, “Hubungan Kelelahan, Unsafe Condition dan Praktik Penggunaan Alat Pelindung Diri (APD) dengan Kecelakaan Kerja pada Pekerja Working At Night di PT. P (Studi di Proyek Hotel dan Apartemen M),†Thesis, pp. 7–41, 2017.
U. H. and Safety, Risk Management Program. Canberra University of South Wales, 2008.
A. Khamid, “ANALISA RISIKO KESELAMATAN DAN KESEHATAN KERJA DAN LINGKUNGAN DENGAN MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY (HAZOP) PADA PROSES SCRAPPING KAPAL DI BANGKALAN MADURA,†Thesis, 2018.
H. Sofyan and M. F. Maulana, “ANALISIS BAHAYA DAN RISIKO K3 DENGAN METODE HIRARC PADA AREA DIESHOP DI PT XYZ PLANT 2,†vol. 10, no. 01, pp. 21–26, 2022.
F. C. Gondosiswanto, “Analisis Unsafe Act Dan Unsafe Condition Pada Proyek Pembangunan Gedung X,†Dimens. Utama Tek. Sipil, vol. 4, no. 1, pp. 9–14, 2017, doi: 10.9744/duts.4.1.9-14.
A. Alijoyo, B. Wijaya, and I. Jacob, “A Hazard and Operability Studies RISK EVALUATION RISK ANALYSIS: Consequences Probability Level of Riskâ€, [Online]. Available: www.lspmks.co.id
C. Anwar, W. Tambunan, and S. Gunawan, “Analisis Kesehatan Dan Keselamatan Kerja (K3) Dengan Metode Hazard and Operability Study (Hazop),†J. Mech. Eng. Mechatronics, vol. 4, no. 2, p. 61, 2019, doi: 10.33021/jmem.v4i2.825.
N. A. Anggraini and Y. S. Purnomo, “Analisis Pengendalian Risiko Kecelakaan Kerja dengan Metode HIRARC Pada Pengelolaan Limbah Medis Rumah Sakit Kelas B di Kabupaten Sidoarjo,†ESEC Proc., vol. 3, no. 1, pp. 65–74, 2022.
S. P. Aprilia, B. Suhardi, and R. D. Astuti, “Analisis Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard and Operability Study (HAZOP) : Studi Kasus PT. Nusa Palapa Gemilang,†Performa Media Ilm. Tek. Ind., vol. 19, no. 1, pp. 1–8, 2020, doi: 10.20961/performa.19.1.39385.
Irzal, “Dasar-Dasar Kesehatan dan Keselamatan Kerja,†vol. Edisi 1, 2016.
S. Bastuti, “Apartemen Menggunakan Metode Hazard Operability Study ( HAZOPS ),†J. INTECH Tek. Ind. Univ. Serang Raya, vol. 7, no. 1, pp. 7–14, 2021.
H. Putro and S. Priyanto, “ANALISIS PENERAPAN SISTEM K3 TERHADAP KINERJA PROYEK JALAN TOL CIJAGO SEKSI 2B kecelakaan kerja . Anas Zaini Z Iksan selaku Ketua Umum Asosiasi Ahli Keselamatan dan Kesehatan Kerja dan Pengurus yang tidak memenuhi dikenakan sanksi sesuai dengan Undang- pe,†vol. 20, no. 1, 2021.
W. Whandhih, “Upaya Mengurangi Resiko Kecelakaan Kerja Diatas Kapal KM Asia Putra,†2021.
M. R. Hendianto and N. Hendrasarie, “Kemampuan Filter Rokok Non-Pakai Sebagai Adsorben Dalam Mengurangi Gas Emisi CO Dan HC,†J. Serambi Eng., vol. 5, no. 4, pp. 1427–1433, 2020, doi: 10.32672/jse.v5i4.2355.
D. Febriyan, G. Anindita, and N. E. Mayangsari, “Analisis Potensi Bahaya Menggunakan Metode Hazop Dan Fuzzy Layer of Protection Analysis Pada Desiccant Dehydration Unit Di Pt Lapindo Brantas . Inc,†no. 2581, pp. 328–333, 2017.
A. Iqbal Ibrahim and N. Hendrasarie, “Pelaksanaan Inspeksi Kesehatan Keselamatan Kerja (K3) pada PT. Pelabuhan Indonesia (Persero) Regional III Subregional Jawa Pelabuhan Tanjung Perak,†Indones. J. Appl. Sci. Technol., vol. 3, no. 2, pp. 53–56, 2022.
M. R. W. Sabrina and Y. Widharto, “Analisis Potensi Bahaya Dengan Metode Hazard and Operability Study Melalui Perangkingan Risk Assessment Studi Kasus: Divisi Spinning Unit 4 Ring Yarn Pt Apac Inti Corpora,†Ind. Eng. Online J., vol. 7, no. 4, pp. 1–7, 2018.
Y. Zalaya, “Overview konsep pengendalian bahaya,†pp. 1–17, 2018, [Online]. Available: lms-paralel.esaunggul.ac.id/
J. Branaman and & Asi, “Kiken Yochi Training (KYT),†2017, [Online]. Available: https://www.insafetyconf.com/media/PDF/safety_conf_2017/6A_Branaman.pdf
M. A. Wagiman and F. Yuamita, “Analisis Tingkat Risiko Bahaya Kerja Menggunakan Metode Hazop (Hazard And Operability) Pada PT Madubaru PG/PS Madukismo.,†J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 4, pp. 277–285, 2022, doi: 10.55826/tmit.v1iiv.34.
T. Vimalasari, “Hazard and Operability Study (HAZOP) dan Penentuan Safety Integrity Level (SIL) pada Boiler SB-02 PT. SMART Tbk Surabaya,†pp. 1–53, 2016.
Downloads
Published
How to Cite
Issue
Section
License
Please find the rights and licenses in Jurnal EnviScience (Environment Science). By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
2. Author(s)' Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User/Public Rights
Jurnal EnviScience's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, Jurnal EnviScience permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and Jurnal EnviScience on distributing works in the journal and other media of publications. Unless otherwise stated, the authors are public entities as soon as their articles got published.
4. Rights of Authors
Authors retain all their rights to the published works, such as (but not limited to) the following rights;
Copyright and other proprietary rights relating to the article, such as patent rights,
The right to use the substance of the article in own future works, including lectures and books,
The right to reproduce the article for its own purposes,
The right to self-archive the article (please read out deposit policy),
The right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal (Jurnal EnviScience).
5. Co-Authorship
If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. Jurnal EnviScience will not be held liable for anything that may arise due to the author(s) internal dispute. Jurnal EnviScience will only communicate with the corresponding author.
6. Royalties
Being an open accessed journal and disseminating articles for free under the Creative Commons license term mentioned, author(s) aware that Jurnal EnviScience entitles the author(s) to no royalties or other fees.
7. Miscellaneous
Jurnal EnviScience will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed. Jurnal EnviScience's editors may modify the article to a style of punctuation, spelling, capitalization, referencing and usage that deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers as mentioned in point 3.